How to mount blink outdoor cameras?

In this guide, we'll walk you through the process of mounting a Blink Outdoor Camera step by step, ensuring it’s placed securely and provides optimal surveillance for your outdoor space.

Outdoor security cameras like the Blink Outdoor Camera provide peace of mind by allowing you to monitor your property day and night. These cameras are designed for easy installation, making them perfect for DIY setups. However, to get the best performance and coverage, mounting them correctly is essential. 

Step 1: Choose the Right Location

Before you start drilling or attaching the camera, selecting the right location is critical. Here are some factors to consider when choosing the mounting spot:

• Height: Install the camera at least 8 to 10 feet above the ground. This height offers a wide view of the area and keeps the camera out of reach from potential tampering.
• Coverage Area: Make sure the camera is placed where it can cover the most critical areas, like entryways, driveways, or backyards. The Blink Outdoor Camera has a 110-degree field of view, so position it to maximize coverage.
• Avoid Direct Sunlight: Direct exposure to sunlight can cause glare or damage the camera lens over time. Choose a location that provides shade during the hottest parts of the day or use eaves and overhangs for protection.

Once you've selected the right location, it's time to prepare the Blink Outdoor Camera for installation. The camera comes with a mount and all necessary hardware, so there's no need to purchase additional components. However, you’ll need a few basic tools:

• A screwdriver (if mounting on wood)
• A drill (if mounting on brick, concrete, or stucco)
• Screws and anchors (included in the Blink kit)

The Blink Outdoor Camera uses a simple mounting system, which includes a round plastic mount with a hinge that allows you to adjust the camera's angle.

For Wood or Drywall Surfaces:

1. Hold the mounting bracket up to the desired spot.
2. Use a pencil to mark the holes where the screws will go.
3. If mounting on wood or drywall, you can directly screw the bracket in using the provided screws.
4. Ensure the mount is secure before proceeding.

For Brick, Concrete, or Stucco Surfaces:

1. Mark the holes for the screws on the mounting surface.
2. Drill pilot holes using a masonry drill bit.
3. Insert wall anchors into the holes to provide additional support.
4. Secure the mount by screwing it into the anchors.

Once the mount is securely attached to the wall or other surface, it’s time to connect the camera. The Blink Outdoor Camera easily snaps onto the mount via the hinge system. Align the back of the camera with the mount and press it firmly into place until it clicks.

The Blink Outdoor Camera mount allows for easy adjustment, so you can position the camera at the ideal angle. Tilt and rotate the camera to ensure it’s covering the desired area. You can always fine-tune the angle after checking the camera's live feed from the Blink app.

Once the camera is mounted and angled correctly, open the Blink app to test the live video feed. Walk around the monitored area to ensure the camera is capturing the correct spots and adjust the angle if needed. You should also check the night vision mode to see how well the camera performs in low-light conditions.

Mounting a Blink Outdoor Camera is a straightforward process that doesn’t require professional assistance. By following these steps, you can ensure your camera is positioned correctly for optimal surveillance and protection of your home. With the right placement, angle, and installation, your Blink camera will be ready to keep an eye on your outdoor spaces day and night.